Tektronix MSO54, Programmer'S Manual

Page: 219 / 1026

Commands listed in alphabetical order
Examples
CH4:PROBEFUNC:EXTUNITS "Pascals"
sets the unit of measurement for the
Channel 4 external attenuator.
CH2:PROBEFUNC:EXTUNITS?
might return
:CH2:PROBEFUNC:EXTUNITS
"Pascals"
, indicating that the Channel 2 external attenuator units of
measurement are Pascals.
CH<x>:PROBEFunc:EXTUnits:STATE
This command sets or queries the custom units enable state for the speci fi ed
channel. The channel is speci fi ed by x.
Group Vertical
Syntax
CH<x>:PROBEFunc:EXTUnits:STATE {ON|OFF|<NR1>}
Arguments
OFF
argument turns off external units.
ON
argument turns on external units.
<NR1>
= 0 turns off external units; any other value turns on external units.
Examples
CH2:PROBEFunc:EXTUnits:STATE ON
turns on external units.
CH2:PROBEFunc:EXTUnits:STATE?
might return
:CH2:PROBEFUNC:EXTUNITS:STATE 0
indicating that external units are
off for the speci fi ed channel.
CH<x>:SCAle
This command sets or returns the vertical scale for the speci fi ed analog channel.
The channel is speci fi ed by x.
Group Vertical
Syntax
CH<x>:SCAle
<NR3>
Arguments
<NR3>
is the vertical scale for the speci fi ed analog channel.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-203