Tektronix MSO54, Programmer'S Manual

Page: 138 / 1026

Commands listed in alphabetical order
Syntax
BUS:B<x>:AUDio:DATa:SOUrce
{CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
BUS:B<x>:AUDio:DATa:SOUrce?
Arguments
CH<x>
speci fi es an analog channel as the data source waveform for the audio bus.
CH<x>_D<x>
speci fi es a digital channel as the data source waveform for the
audio bus.
MATH<x>
speci fi es an math waveform as the data source waveform for the audio
bus.
REF<x>
speci fi es an reference waveform as the data source waveform for the
audio bus.
REF<x>_D<x>
speci fi es a digital reference waveform as the data source waveform
for the speci fi ed audio bus.
Examples
BUS:B1:AUDIO:DATA:SOURCE CH1_D1
sets the data source to D1 of
FlexChannel 1.
BUS:B1:AUDIO:DATA:SOURCE?
might return
:BUS:B1:AUDIO:DATA:SOURCE
CH3
indicating that the data source is set to CH3.
BUS:B<x>:AUDio:DATa:THReshold
This command sets or queries the audio data source threshold for the speci fi ed
bus. The bus is speci fi ed by x.
Conditions Requires option SR-AUDIO.
Group Bus
Syntax
BUS:B<x>:AUDio:DATa:THReshold <NR3>
BUS:B<x>:AUDio:DATa:THReshold?
Related Commands BUS:B<x>:AUDio:DATa:SOUrce
Arguments
<NR3>
is the audio data source threshold for the speci fi ed bus.
Examples
BUS:B3:AUDIO:DATA:THRESHOLD
1.5 sets the Bus 3 audio clock source
threshold to 500.0 mV.
2-122 MSO54, MSO56, MSO58, MSO58LP Programmer