Get Acquainted with the Instrument
16. Run/Stop
. Push to start or stop
acquisitions.
17. Single
. Push to make a single
acquisition.
18. Autoset
. Push to automatically set the
vertical, horizontal, and trigger controls
for a usable, stable display.
19. Trigger Level
. Turn to adjust the trigger
level. Push to set the trigger level to the
midpoint of the waveform.
20. Force Trig
. Push to force an immediate
trigger event.
21. Vertical Position
. Turn to adjust the
vertical position of the corresponding
waveform. Push
Fine
to make smaller
adjustments.
22. 1, 2, 3, 4
. Push to display or remove
the corresponding waveform from the
display and access the vertical menu.
23. Vertical Scale
. Turn to adjust the
vertical scale factor of the corresponding
waveform (volts/division).
24. Print
. Push to print a screen image using
the printer selected in the Utility menu.
(See page 171,
25. Power
switch. Push to power on or off
the instrument.
26. USB 2.0 host ports
. Insert a USB
cable here to connect peripherals to
the oscilloscope, such as a keyboard, a
printer, or a
fl
ash drive. There are two
more USB 2.0 host ports on the rear
panel.
40
MDO4000 Series Oscilloscopes User Manual
Summary of Contents for MDO4054-3
