Using Application Modules
Using Application Modules
Optional application module packages extend the capability of your oscilloscope. (See page 15,
Installing an Application Module
Refer to the
MSO4000B, DPO4000B, and MDO4000 Series Application Module Installation Instructions
hat came with
your application module for instructions on installing and testing an application module. Some modules are described in
the following list. Additional modules may be available. Contact your Tektronix representative or visit our Web site at
www.tektronix.com for more information. Also, refer to
Contacting Tektronix
at the beginning of the manual.
The
DPO4AERO Aerospace Serial Triggering and Analysis Module
adds triggering and analysis on MIL-STD-1553
buses.
The
DPO4AUDIO Audio Serial Triggering and Analysis Module
adds triggering and analysis on I
2
S, Left Justi
fi
ed
(LJ), Right Justi
fi
ed (RJ), and TDM buses.
The
DPO4AUTO Automotive Serial Triggering and Analysis Module
adds triggering and analysis on packet level
information in serial buses used in automotive designs (CAN and LIN), as well as analytical tools to help you ef
fi
ciently
analyze your serial bus. These include digital views of the signal, bus views, packet decoding, search tools, and event
tables with timestamp information.
The
DPO4AUTOMAX FlexRay, CAN, and LIN Serial Triggering and Analysis Module
offers the features of the
DPO4AUTO Module plus FlexRay serial bus support.
The
DPO4COMP Computer Serial Triggering and Analysis Module
adds triggering and analysis on byte or packet
level information in RS-232, RS-422, RS-485, and UART buses, and analytical tools to help you ef
fi
ciently analyze
your serial bus. These include digital views of the signal, bus views, packet decoding, search tools, and event tables
with timestamp information.
The
DPO4EMBD Embedded Serial Triggering and Analysis Module
adds triggering and analysis on packet level
information in serial buses used in embedded designs (I
2
C and SPI), as well as analytical tools to help you ef
fi
ciently
analyze your serial bus. These include digital views of the signal, bus views, packet decoding, search tools, and event
tables with timestamp information.
The
DPO4ENET Serial Triggering and Analysis Module
adds triggering and analysis on 10BASE-T and 100BASE-TX
bus signals.
The
DPO4LMT Limit and Mask Test Module
adds testing acquired waveforms against a comparison waveform with
user-de
fi
ned horizontal and vertical limits or against telecom standard masks or custom masks.
The
DPO4PWR Power Analysis Module
adds measurements of power quality, switching loss, harmonics, ripple,
modulation, safe operating area, and slew rate (dV/dt and dI/dt).
The
DPO4USB USB 2.0 Serial Triggering and Analysis Module
adds triggering and analysis on USB low-speed,
full-speed, and high-speed buses.
The
DPO4VID Extended Video Module
adds triggering on a variety of standard HDTV signals, as well as on custom
(non-standard) bilevel and trilevel video signals with 3 to 4,000 lines.
The
MDO4TRIG Advanced RF Triggering Module
enables triggering with RF power as a source for Pulse Width,
Timeout, Runt, Logic, and Sequence triggers.
MDO4000 Series Oscilloscopes User Manual
179
Summary of Contents for MDO4054-3
