Analyze Waveform or Trace Data
R1
3.
Push
Vertical
in the side-bezel menu and
use the multipurpose knobs to adjust the
vertical settings of the reference waveform
or trace.
Vertical
0.00 div
100 mV/div
4.
Push
Horizontal
in the side-bezel menu
and use the multipurpose knobs to adjust
the horizontal settings of the reference
waveform or trace.
Horizontal
0.00 s
4.00
μ
s/div
5.
Push
Edit Label
and use the resulting
menus to de
fi
ne labels to display with the
reference waveforms and traces.
Edit Labels
6.
Pus
Ref Details
to read information
about the selected reference. Use this
to determine whether the reference is an
analog waveform or an RF trace.
Ref Details
7.
Push
Save to File
to store reference
information in external storage.
Save to
File
Quick Tips
Selecting and Displaying Reference Waveforms.
You can display all the reference waveforms at the same time.
Push the appropriate screen button to select a particular reference waveform.
Removing Reference Waveforms from the Display.
To remove a reference waveform from the display, push the
front-panel
R
button to access the lower-bezel menu. Then push the associated button from the lower-bezel menu
to turn it off.
Scaling and Positioning a Reference Waveform.
You can position and scale a reference waveform independently
from all other displayed waveforms. Select the reference waveform and then adjust it with a multipurpose knob. You can
do this whether acquisition is running or not.
If a reference waveform is selected, scaling and repositioning of the reference waveform operates the same way
whether zoom is turned on or off.
Saving 10 M and 20 M Reference Waveforms.
10 M and 20 M reference waveforms are volatile and not saved when
the oscilloscope power is turned off. To keep these waveforms, save them to external storage.
MDO4000 Series Oscilloscopes User Manual
143
Summary of Contents for MDO4054-3
