Tektronix MDO4000C Series, User Manual

Page: 63 / 160

3. Release Menu Off , and then release Autoset .
4. Select the desired setting using the side menu.
Autoset
Enabled
Autoset
Disabled
4
4
Quick Tips
■ To position the waveform appropriately, Autoset may change the vertical
position. Autoset always sets vertical offset to 0 V.
■ If you use Autoset when no channels are displayed, the instrument turns on
channel 1 and scales it.
■ If you use Autoset and the oscilloscope detects a video signal, the
oscilloscope automatically sets the trigger type to video and makes other
adjustments to display a stable video signal.
Using FastAcq
FastAcq
™
provides high-speed waveform capture. It is helpful in finding elusive
signal anomalies. Fast acquisition mode reduces the dead time between
waveform acquisitions, enabling the capture and display of transient events such
as glitches and runt pulses. Fast acquisition mode can also display waveform
phenomena at an intensity that reflects their rate of occurrence.
To use FastAcq:
1. Push Acquire on the front panel.
2. Push FastAcq on the lower menu.
3. Toggle FastAcq on the side menu to select On.
4. Push Waveform Palette on the side menu and use the multipurpose knob to
select the desired display palette.
Acquire the signal
MDO4000C Series Oscilloscope User Manual 41
Preliminary