11.
Digital channel input
12.
Display: shows frequency and/or time domain
13.
Arbitrary/function generator (AFG) enable button
Rear-Panel Connectors
1. AFG OUT
. Use the AFG OUT port to transmit signals from the arbitrary
function generator.
2. AUX OUT
. Use to output Trigger, Signal Out, or AFG Sync Out. Also used
to generate a signal on a main trigger pulse, as a 10 MHz reference signal, or
to output a signal when other events happen, such as mask-limit test events.
3. REF IN
. Use the 10 MHz external reference input to provide an external
timebase.
4. LAN
. Use the LAN (Ethernet) port (RJ-45 connector) to connect the
oscilloscope to a 10/100/1000 Base-T local area network.
5. Video Out
. Use the Video Out port (DB-15 female connector) to show the
oscilloscope display on an external monitor or projector.
Get acquainted with the instrument
36
MDO4000C Series Oscilloscope User Manual
Preliminary
Summary of Contents for MDO4000C Series
Page 2: ...P r e l i m i n a r y...
Page 20: ...Compliance Information xvi MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
Page 74: ...Acquire the signal 52 MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
Page 140: ...Save and recall information 118 MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
