Tektronix MDO3012, User Manual

Page: 80 / 243

Acquire the Signal
Using Autoset
Autoset adjusts the instrument (acquisition, horizontal, trigger, and vertical controls) such that it displays four or fi ve waveform
cycles for analog channels with the trigger near the midlevel, and ten cycles for digital channels.
Autoset works with both the analog and digital channels.
1. To autoset an analog channel, connect the
analog probe, and then select the input
channel. (See page 54,
Setting Up Analog
Channels .)
To autoset a digital channel, connect
the logic probe and select the input
channel. (See page 81,
Setting Up Digital
Channels .)
2. Push Autoset to execute an Autoset.
3. If desired, push Undo Autoset to undo
the last Autoset.
Undo
Autoset
You can also disable the Autoset function. To disable or enable the Autoset function:
1. Push and hold Autoset .
2. Push and hold Menu Off .
3. Release Menu Off , and then release
Autoset .
58 MDO3000 Series Oscilloscopes User Manual