Tektronix MDO3012, User Manual

Page: 65 / 243

Get Acquainted with the Instrument
14. Horizontal Position . Turn to adjust the trigger point location relative to the acquired waveforms. Push to center
when delay is on. Push to set to 10% when delay is off.
15. Horizontal Scale . Turn to adjust the horizontal scale (time/division).
16. Autoset . Push to automatically set the vertical, horizontal, and trigger controls for a usable, stable display.
17. Single . Push to make a single sequence acquisition.
18. Run/Stop . Push to start or stop acquisitions.
19. Trigger Level . Turn to adjust the trigger level.
Push Level to Set 50% . Push the Trigger level knob to set the trigger level to the midpoint of the waveform.
20. Force Trig . Push to force an immediate trigger event.
MDO3000 Series Oscilloscopes User Manual 43