Tektronix MDO3012, User Manual

Page: 187 / 243

Save and Recall Information
Save
Screen
Image
3. Push File Format on the side menu to
select among: .tif, .bmp, and .png formats.
File
Format
.png
4. Push Orientation to select between saving
the image in a landscape (horizontal) and a
portrait (vertical) orientation.
Orientation
5. Push Ink Saver to turn the Ink Saver mode
on or off. When on, this mode provides a
white background.
Ink Saver
On | Off
6. Push Edit File Name to create a custom
name for the screen image fi le. Skip this
step to use a default name.
Edit File
Name
7. Push OK Save Screen Image to write the
image to the selected media.
OK Save
Screen
Image
For information on printing screen images of waveforms, go to Printing a Hard Copy . (See page 172, Printing a Hard Copy .)
Saving and Recalling Waveform and Trace Data
Waveform and trace data consists of the numeric values for each point in the waveform or trace. It copies the data, as
opposed to a graphical image of the screen. To save the current waveform or trace data or to recall previously stored
waveform or trace data:
1. Push Save / Recall Menu .
2. Push Save Waveform or Recall Waveform
on the lower menu.
Save
Screen
Image
Save
Waveform
Save
Setup
Recall
Waveform
Recall
Setup
Assign
Save | to
Waveform
File
Utilities
NOTE. The oscilloscope can save digital
waveforms to .csv fi les, not reference memories.
The oscilloscope cannot recall digital waveforms.
NOTE. The oscilloscope can save, but not
recall, RF acquisitions as .TIQ fi les. You can use
.TIQ fi les with Tektronix SignalVu Vector Signal
Analysis software.
MDO3000 Series Oscilloscopes User Manual 165