Analyze Waveform or Trace Data
In this example, two vertical cursors appear
on the selected waveform. As you turn
Multipurpose a
, you move one cursor to the
right or left. As you turn knob
Multipurpose
b
, you move the other cursor.
2.
With cursors on, push
Select
.
This turns the cursor linking on and off.
If linking is on, turning
Multipurpose a
moves the two cursors together. Turning
Multipurpose b
adjusts the time between
the cursors.
3.
Push
Fine
to toggle between a coarse and a
fi
ne adjustment for the
Multipurpose a
and
Multipurpose b
knobs.
Pushing
Fine
also changes the sensitivity of
other knobs as well.
4.
Push and hold
Cursors
to display the cursor
menu.
5.
Push
Cursors
on the lower menu to set the
cursors to
Screen
.
In screen mode, two horizontal bars and two
vertical bars span the graticule.
Cursors
Waveform
Screen
Source
Selected
Waveform
Bars
Horizontal
Vertical
Linked
On
Off
Bring
Cursors
On Screen
Cursor
Units
6.
Turn
Multipurpose a
and
Multipurpose b
to move the pair of horizontal cursors.
MDO3000 Series Oscilloscopes User Manual
135
Summary of Contents for MDO3012
