Tektronix Keithley SourceMeter 2470, Reference Manual

Page: 912 / 995

Section 14: TSP command reference 2470 High Voltage SourceMeter Instrument Reference Manual
14-272 2470-901-01 Rev. A /
May
2019
tsplink.line[N].reset()
This function resets some of the TSP-Link trigger attributes to their factory defaults.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
tsplink.line[ N ].reset()
N The trigger line (1 to 3)
Details
The
tsplink.line[ N ].reset()
function resets the following attributes to their default values:
•
tsplink.line[ N ].mode
•
trigger.tsplinkin[ N ].edge
•
trigger.tsplinkout[ N ].logic
•
trigger.tsplinkout[ N ].pulsewidth
•
trigger.tsplinkout[ N ].stimulus
This also clears
trigger.tsplinkin[ N ].overrun
.
Example
tsplink.line[3].reset() Resets TSP-Link trigger line 3 attributes to
default values.
Also see
trigger.tsplinkin[N].edge (on page 14-262)
trigger.tsplinkin[N].overrun (on page 14-263)
trigger.tsplinkout[N].logic (on page 14-265)
trigger.tsplinkout[N].pulsewidth (on page 14-266)
trigger.tsplinkout[N].stimulus (on page 14-267)
tsplink.line[N].mode (on page 14-271)