2-88
Section 2 — Installation
Remote Aux Panel Installation
1.
Turn OFF the power to the Model 4000.
2.
Attach the Communications Bus Cable(s) and the Power Supply cable to the
connectors on the rear of the Remote Aux Panel.
3.
Using standard rack-mounting screws and washers (not supplied), install the
Remote Aux Panel in the equipment rack.
4.
Plug the Remote Aux Panel power supply into the AC power source (100–120
VAC or 200–240 VAC).
5.
After all panels have been connected, plug the D connector on the
Communications Cable into connector J4 on the Communications I/O module
at the rear of the Model 4000 switcher.
6.
Turn the Model 4000 Switcher’s power on.
Summary of Contents for Grass Valley 4000
