Command Descriptions
MEASure:TINTerval? (Query Only)
Traditional time-interval measurements are performed. The trigger levels are set
automatically, and positive slope is used. The
fi
rst channel in the channel list is
the start channel, and the second is the stop channel.
Group
Measurement
Syntax
MEASure:TINTerval?
(@{1|2}),(@{1|2})]
Arguments
The
fi
rst
(@{1|2|4})
is the start channel and the second
(@{1|2|4})
is the stop
channel.
(@1)
means input A
(@2)
means input B.
If you omit the channel, input A is the start channel, and input B is the stop
channel.
MEASure[:VOLT]:MAXimum? (Query Only)
This command measures the positive peak voltage with the input DC coupled.
Group
Measurement
Syntax
MEASure[:VOLT]:MAXimum?[ ({@1|@2})]
Arguments
({@1|@2})
is the measurement channel.
(@1)
means input A,
(@2)
means
input B.
MEASure[:VOLT]:MINimum? (Query Only)
This command measures the negative peak voltage with the input DC coupled.
Group
Measurement
Syntax
MEASure[:VOLT]:MINimum?[ ({@1|@2})]
Arguments
({@1|@2})
is the measurement channel.
(@1)
means input A,
(@2)
means
input B.
2-86
FCA3000, FCA3100, MCA3000 Series Programmer Manual
Summary of Contents for FCA3000 Series
