Tektronix DPO4032, User Manual, Page: 78 / 359

Installation
7. Start your browser on your remote computer.
In the browser address line, enter the IP
address or, if DHCP is set to
On in the
oscilloscope, simply enter the instrument
name.
8. You should now see the e*Scope screen
showing the oscilloscope display, on your Web
browser.
If e*Scope does not work, rerun the procedure.
If it still does not work, contact quali
fi ed service
personnel.
Connecting a USB Keyboard to Your Oscilloscope
You can connect a USB keyboard to a USB Host port on the rear or front panel of the oscilloscope. The oscilloscope will detect the
keyboard, even if it is plugged in while the oscilloscope is powered on.
You can use the keyboard to quickly create names or labels. You can bring up the Label menu through the lower-bezel label button
of the Channel or Bus menus. Use the arrow keys on the keyboard to move the insertion point, and then type in a name or label.
Labeling channels and buses makes the information on the screen easier to identify.
52 MSO4000 and DPO4000 Series Oscilloscopes User Manual