Tektronix DPO4032, User Manual, Page: 41 / 359

Installation
3. Plain BNC Interfaces
Some of these use TEKPROBE capabilities
to pass the waveform signal and scaling
to the oscilloscope. Some only pass the
signal and there is no other communication.
4. Digital Probe Interface (MSO4000 Series
only)
The P6516 probe provides 16 channels of
digital (on or off state) information.
For more information on the many probes available for use with DPO4000 and MSO4000 Series oscilloscopes, refer to
www.tektronix.com.
MSO4000 and DPO4000 Series Oscilloscopes User Manual 15