Tektronix DPO4032, User Manual, Page: 192 / 359

Display Waveform Data
5. Select the desired style from the resulting
side-bezel menu.
Use the
Full graticule for quick estimates of
waveform parameters.
Use the
Grid graticule for full-screen
measurements with cursors and automatic
readouts when cross hairs are not needed.
Use the
Cross Hair graticule for making quick
estimates of waveforms while leaving more
room for automatic readouts and other data.
Use the
Frame graticule with automatic
readouts and other screen text when display
features are not needed.
Quick Tips
You can display IRE and mV graticules. To do this, set the trigger type to video and set the vertical scale to 114 mV/division.
(The 114 mV/division selection is available in the coarse vertical scale settings for the channel when you set the trigger type to
video.) The oscilloscope will automatically display the IRE graticule for NTSC signals, and the mV graticule for other video
signals (PAL, SECAM, HDTV, and custom).
166 MSO4000 and DPO4000 Series Oscilloscopes User Manual