Tektronix DPO4000 Series Programmer'S Manual Download Page 502

Page: 502 / 623

Commands Listed in Alphabetical Order

TRIGger:A:VIDeo:CUSTom{:FORMat|:TYPE}?

Arguments

INTERLAced

argument sets the format for interlaced video lines.

PROGressive

argument sets the format for progressive video lines.

Examples

TRIGGER:A:VIDEO:CUSTOM:FORMAT PROGRESSIVE

sets the custom format for

the A video trigger to progressive lines.

TRIGGER:A:VIDEO:CUSTOM:FORMAT?

might return

:TRIGGER:A:VIDEO:

CUSTOM:FORMAT INTERLACED

indicating that interlaced is selected as the

custom format for the A video trigger.

TRIGger:A:VIDeo:CUSTom:LINEPeriod

Sets or queries the line period for the standard under test. Use this command only
when the video format is set to custom.

Conditions

This command requires a DPO4VID application module.

Group

Trigger

Syntax

TRIGger:A:VIDeo:CUSTom:LINEPeriod <NR3>
TRIGger:A:VIDeo:CUSTom:LINEPeriod?

Arguments

<NR3>

is the custom video line period.

Examples

TRIGGER:A:VIDEO:CUSTOM:LINEPERIOD 50.5E-6

sets the video line period

to 50.5

TRIGGER:A:VIDEO:CUSTOM:LINEPERIOD?

might return

TRIGGER:A:VIDEO:CUSTOM:LINEPERIOD 63.5600E-6

indicating

the video line period is set to 63.56

TRIGger:A:VIDeo:CUSTom:SCAN

Sets or returns the horizontal line scan rate of the A video trigger. Use this
command only when the video format is set to custom.

Conditions

This command requires a DPO4VID application module.

2-488

MSO4000 and DPO4000 Series Programmer Manual

Summary of Contents for DPO4000 Series
















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DPO4000 Series

Reviews:

Brands by name

Popular brands

Tektronix DPO4000 Series, Programmer'S Manual

Search results

Summary of Contents for DPO4000 Series

Reviews:

Brands by name

Popular brands