Acquire the Signal
Quick Tip
Use the zoom feature to see multiple cycles of your signal in the upper part, and a single cycle in the lower part of the display.
Using Wave Inspector to Manage Long Record Length Waveforms
Labeling Channels and Buses
You can add a label to the channels and buses shown on the display for easy identi
fi
cation. The label is placed on the waveform
baseline indicator in the left side of the screen. The label can have up to 32 characters.
To label a channel or bus, follow these steps:
1.
Push a front panel button for an input channel
or a bus.
DPO3000 Series Oscilloscopes User Manual
79