General Safety Summary
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it.
To avoid potential hazards, use this product only as speci
fi
ed.
Only quali
fi
ed personnel should perform service procedures.
To Avoid Fire or Personal Injury
Use Proper Power Cord.
Use only the power cord speci
fi
ed for this product and certi
fi
ed for the country of use.
Connect and Disconnect Properly.
Do not connect or disconnect probes or test leads while they are connected to a voltage
source.
Connect and Disconnect Properly.
De-energize the circuit under test before connecting or disconnecting the current probe.
Ground the Product.
This product is grounded through the grounding conductor of the power cord. To avoid electric shock,
the grounding conductor must be connected to earth ground. Before making connections to the input or output terminals of
the product, ensure that the product is properly grounded.
Observe All Terminal Ratings.
To avoid
fi
re or shock hazard, observe all ratings and markings on the product. Consult the
product manual for further ratings information before making connections to the product.
Connect the probe reference lead to earth ground only.
Do not apply a potential to any terminal, including the common terminal, that exceeds the maximum rating of that terminal.
Power Disconnect.
The power cord disconnects the product from the power source. Do not block the power cord; it must remain
accessible to the user at all times.
DPO3000 Series Oscilloscopes User Manual
v
