Installation
Change
Instrument
Settings
DHCP/
BOOTP
On
| Off
7.
To use Ethernet, push
Ethernet Network
Settings
.
On the side-bezel menu, if you are on a DHCP
Ethernet network and using a through cable,
set DHCP to
On
. If you are using a cross-over
cable, set it to
Off
and set a hard coded TCPIP
address.
Test
Connection
8.
If you are using GPIB, push
GPIB
. Enter the
GPIB address on the side-bezel menu, using
multipurpose knob
a
.
Talk/Listen
Address
(a) 1
This will set the GPIB address on an attached
TEK-USB-488 Adapter.
DPO3000 Series Oscilloscopes User Manual
43
