Installation
Humidity:
Operating: High: 40 °C to 50 °C, 10% to 60% RH
Operating: Low: 0 °C to 40 °C, 10 to 90% RH
Cleaning
Inspect the oscilloscope and probes as often as operating conditions require. To clean the exterior surface, perform the following
steps:
1.
Remove loose dust on the outside of the oscilloscope and probes with a lint-free cloth. Use care to avoid scratching the clear
glass display
fi
lter.
2.
Use a soft cloth dampened with water to clean the oscilloscope. Use an aqueous solution of 75% isopropyl alcohol for
more ef
fi
cient cleaning.
CAUTION.
To avoid damage to the surface of the oscilloscope or probes, do not use any abrasive or chemical cleaning agents.
12
DPO3000 Series Oscilloscopes User Manual
