Analyze Waveform Data
To manually set and clear (delete) marks:
1.
Move (the zoom box) to the area on the
waveform where you want to set (or clear)
a search mark by turning the pan (outer)
knob.
Push the next (
→
) or previous (
←
) arrow
button to jump to an existing mark.
2.
Push
Set/Clear
.
If no search mark is at the screen center,
the oscilloscope will add one.
3.
Investigate your waveform by moving from
search mark to search mark. Use the next
(
→
) or previous (
←
) arrow button to
jump from one marked location to another,
without adjusting any other controls.
DPO3000 Series Oscilloscopes User Manual
195