Trigger Setup
9.
If you are setting up a CAN trigger and have
made a
Trigger On
selection of
Type of
Frame
, push the lower-bezel
Frame Type
button, and select Data Frame, Remote
Frame, Error Frame, or Overload Frame.
If you have made a
Trigger On
selection of
Identi
fi
er
, push the lower-bezel
Identi
fi
er
button, and select a
Format
. Then push the
Identi
fi
er
side-bezel button, and enter a binary
or hex value with multipurpose knobs
a
and
b
.
Push the lower-bezel menu
Direction
button
and select the direction of interest:
Read
,
Write
, or
Read or Write
.
If you have made a
Trigger On
selection
of
Data
. Push the lower-bezel
Data
button
and enter the parameters of interest with
multipurpose knobs
a
and
b
.
DPO3000 Series Oscilloscopes User Manual
127