manualshive.com logo in svg

Tektronix DPO2304SX, Printable Help

Share
Download
Tektronix DPO2304SX Printable Help Download Page 840

Set up a delay measurement

From the Measure menu highlight Time; then select Delay from the submenu, or open the Time tab in the Measurement Setup
control window and click the Delay button under Measurements.

Overview. Use the Delay Measurement control window to set up the instrument to measure the delay between two waveforms.

 

 

To use.

1. Select the source waveforms from the 

Channels Selector

.

2. Use the other controls in the control window to select the Delay Edges, Mid Reference point, Mid2 Reference point, and to

specify the Search Direction.

3. Click OK to add the measurement to the measurement list, or click Cancel to cancel the measurement and return to the

Measurement control window.

Oscilloscope reference

 

808

 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands