Tektronix DPO2304SX, Printable Help

Page: 783 / 920

Cycle mean
This voltage measurement is the arithmetic mean over the first cycle in the waveform or the first cycle in the gated region.
Cycle RMS
This voltage measurement is the true Root Mean Square voltage over the first cycle in the waveform or the first cycle in the gated
region.
Data direction
In the Data Direction drop-down list, specify the data direction.
Data threshold
1. Click in the Data Threshold entry box.
2. Use a multipurpose knob to set the threshold voltage for the trigger.
Dead time between acquisitions
Delay edges
The Delay Edge buttons determine whether the measurements will be taken on the rising or falling edge of the waveform. After
selecting an edge, the graphic in the control window is updated to show the edge from which the measurements will be taken.
Delay
This timing measurement is the time between the mid reference (default 50%) amplitude point of two different waveforms
Trigger delay
Use the Trig Delay control to trigger the instrument a specified period of time after the A trigger. After the A trigger arms the
trigger system, the instrument triggers on the next B trigger event that occurs after the time that you specify with the Trig Delay
control.
■ Click in the Trig Delay entry box, and then use the multipurpose knob to enter the delay time.
Trigger events
Use the Trig Event control to trigger the instrument a specified number of events after the A trigger. After the A trigger arms the
trigger system, the instrument triggers on the nth B trigger event.
■ Click Trig Event, and then use the multipurpose knob to enter the number of B trigger events.
■ Click the increment/decrement buttons to enter the number of B trigger events.
Oscilloscope reference
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 751