Tektronix DPO2304SX Printable Help Download Page 503

Page: 503 / 920

Select a channel

Specify the Ch <1 - 4> for oscilloscope operations.

■

Specify a channel to dedicate the controls for use with an input on the front panel.

■

Shaded buttons Indicate unused or undefined waveforms.

Enable the visual trigger expression editor

From the Visual Trigger menu, double click the Visual Trigger expression.

To use.

■

Click Enable to toggle display of the visual trigger waveform on and off.

Behavior. This control only affects the visual triggering.

What do you want to do next?

Learn about visual trigger setup.

Learn about creating a visual trigger area.

Learn about controlling visual triggering.

Learn about saving a visual trigger setup.

Learn about recalling a visual trigger setup.

Learn about visual trigger qualification.

Edit the visual trigger expression

From the Visual Trigger menu, double click the Visual Trigger expression.

To use.

■

Click in the readout field to enter the visual trigger expression.

■

Click a button to enter its character or operator into the expression.

■

Use the

Text Edit Controls

to move the insertion point (cursor) within the expression.

Behavior. The characters are entered into the expression one at a time.

What do you want to do next?

Learn about visual trigger setup.

Learn about creating a visual trigger area.

Learn about controlling visual triggering.

Learn about saving a visual trigger setup.

Learn about recalling a visual trigger setup.

Learn about visual trigger qualification.

Trigger setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

471

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DPO2304SX

Reviews:

Tektronix DPO2304SX, Printable Help, Page: 503 / 920

Search results

Summary of Contents for DPO2304SX

Reviews: