manualshive.com logo in svg

Tektronix DPO2304SX, Printable Help, Page: 168 / 920

Share
Download
Tektronix DPO2304SX Printable Help Download Page 168

Behavior

The instrument acquires data from the channel you select for each component. The channel type supported are analog or digital
(MSO models only) input. The analog input consists of two analog signals (D+ and D-). The digital input consists of three digital
signals (D+, D-, and D+/D- [differential probing between D+ and D-]).

What do you want to do next?

Learn more about bus setups.

Learn about bus configuration.

Learn about digital setups.

Select the serial bus channel input

From the Bus Setup window, select Serial from the Bus Type list and then select one of the bus types.

To use

To change the input for the displayed components of the bus, click the Input and select from the cascading list. Digital channels
are not available on SX models.

 

 

NOTE. You have the option to add user-defined labels for the bus sources.

Bus setups

 

136

 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments