Home
/
Tektronix
/
DPO2304SX
/
Printable Help

Tektronix DPO2304SX, Printable Help, Page: 135 / 920

Share

Page: 135 / 920

Tektronix DPO2304SX Printable Help Download Page 135

Learn more about digital setups.

Learn about bus setups.

Learn about bus configuration.

Turn on or off the digital channels D15-D8 and D7-D0

NOTE. The Turn On or Off the Digital Channels D15-D8 and D7-D0 option is available only on MSO5000B and MSO70000C/DX
Series instruments and DPO5000B Series instruments with option MSOE installed, and DPO70000DX instruments with option
MSOU installed.

From the Digital Setup menu, select the D15-D8 or D7-D0 tab.

To use

■

Click Turn D7–D0 or Turn D15-D8 On button to turn on the digital channels D0 to D7 or D8 to D15 respectively.

■

Click the Threshold entry box and use the keypad to enter a value for the voltage level or use the multipurpose knobs to
select a voltage level.

■

Click the Position entry box and move the channel using the multipurpose knob.

Behavior

As you turn on the digital channels, the corresponding channel indicator along the bottom of the menu changes to match the
color on the digital channel button.

What do you want to do next?

Learn about bus setups.

Learn about bus configuration.

Learn more about digital setups.

Digital setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

103

«
...
133
134
135
136
137
...
»

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments