manualshive.com logo in svg

Tektronix DPO2304SX, Printable Help

Share
Download
Tektronix DPO2304SX Printable Help Download Page 133

To use

1. Connect the logic probe to the instrument.

2. Connect the probe to the input signal sources.

 

 

CAUTION.

To prevent damage to the instrument always wear an antistatic wrist strap when making connections to the instrument and
observe the maximum input voltage ratings for input connectors.

3. Set up digital channels and buses using the Digital Setup and Bus Setup control windows through the Digital menu. The Bus

Setup window is also accessible through the Vertical menu.

What do you want to do next?

Learn about setting up the digital channels.

Learn about bus setups.

Learn about bus configuration.

Digital channel threshold and position

NOTE. The Digital Channel Threshold and Position option is available only on MSO5000B and MSO70000C/DX Series
instruments and DPO5000B Series instruments with option MSOE installed, and DPO70000DX instruments with option MSOU
installed.

From the Digital menu, select Digital Setup.

Overview

Use these controls to define the voltage threshold level of digital channels and their vertical position in the display.

 

Digital setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 

101

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands