Power-On and Power-Off Procedure
Upgrading Firmware
To upgrade the
fi
rmware of the oscilloscope:
1.
Open up a Web browser and go to www.tektronix.com/software. Proceed to
the software
fi
nder. Download the latest
fi
rmware for your oscilloscope on
your PC.
Unzip the
fi
les and copy the
fi
rmware.img
fi
le into the root folder of a USB
fl
ash drive.
2.
Power off your oscilloscope.
3.
Insert the USB
fl
ash drive into the front-panel USB port on your oscilloscope.
4.
Power on the oscilloscope. The oscilloscope automatically recognizes and
installs the replacement
fi
rmware.
If the oscilloscope does not install the
fi
rmware, rerun the procedure. If
the problem continues, try a different model of USB
fl
ash drive. Finally, if
needed, contact quali
fi
ed service personnel.
NOTE.
Do not power off the oscilloscope or remove the USB
fl
ash drive until the
oscilloscope
fi
nishes installing the
fi
rmware.
5.
Power off the oscilloscope and remove the USB
fl
ash drive.
6.
Power on the oscilloscope.
7.
Push
Utility
.
8.
Push
Utility Page
.
9.
Turn multipurpose knob
a
and select
Con
fi
g
.
10.
Push
About
. The oscilloscope displays the
fi
rmware version number.
11.
Con
fi
rm that the version number matches that of the new
fi
rmware.
NOTE.
For more information on updating the
fi
rmware, refer to the electronic
(PDF) MSO/DPO2000B User Manual.
22
MSO2000B and DPO2000B Installation and Safety Instructions
