Tektronix BERTScope, Quick Start User Manual

Page: 38 / 42

Speci fi cations
Table 5: Clock speci fi cations (cont.)
Characteristic Description
Subrate clock output (as speci fi ed for clock output except for the following)
Subrate divider ratios Full rate divided by 1, 2, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 24, 25, 28, 30, 32, 35,
36, 40, 42, 45, 48, 49, 50, 54, 56, 60, 63, 64, 70, 72, 80, 81, 90, 100, 108, 112, 120,
126, 128, 140, 144, 160, 162, 168, 180, 192, 196, 200, 216, 224, 240, 252, 256, 280,
288, 320, 324, 336, 360, 384, 392, 432, 448, 504, 512, 576, 648
Table 6: Trigger information (rear panel)
Characteristic Description
Trigger output
Interface type SMA, 50 Ω , DC coupled
Latency 300 ms
Trigger input
Interface type SMA, 50 Ω , DC-coupled to 0 V
Threshold 1.5 V
Minimum pulse width 50 ns
Table 7: General speci fi cations
Characteristic Description
Device information Serial number, revision codes available using front-panel
Control interface USB cable (supplied). Unit also provides hub capability for 3 additional USB ports.
Table 8: Physical speci fi cations
Characteristic Description
Height 9.5 cm (3.75 in)
Width 39.4 cm (15.5 in)
Depth 33.6 cm (13.25 in)
Weight 9.1 kg (20 lbs)
Power 150 W maximum
Voltage 100 to 240 VAC, 50/60 Hz
Power fuse 3.15 A, 250 V, 5 mm x 20 mm, fast blow
20 CR125A, CR175A, CR286A Quick Start User Manual