Operating Basics
Security menu
Use the Security menu to limit access to the Firmware Update and Service menus
(refer to the Service manual for information about the service menu). From the
Security Menu, you can set access protection and change passwords.
Access protection
In the
Access Protection
menu, you can set a password that must be entered for a
fi
rmware update to be implemented. Access protection is set to Off by default. To
turn it on, do the following:
1.
Push the front-panel
Utility button to display
the Utility menu, and then
push the -more- bezel
button twice.
2.
Select Security Menu.
3.
Select Access Protection
to display the password
input page.
4.
Enter your password.
Use the general purpose
knob to select the
characters and push
the Enter Character
bezel button after each
selection.
As you enter the
characters of your
password, they are
displayed as a series of
asterisks (*******) on the
password input page.
If no speci
fi
c password
has been previously
de
fi
ned, use the default
password DEFAULT.
5.
Select OK to turn the
access protection on.
NOTE.
When Access Protection is on, the Change Password bezel button is
disabled.
70
AFG2021 Quick Start User Manual