Tektronix AFG1022, Quick Start User Manual

Page: 37 / 61

Operating basics
AFG1022 Quick Start User Manual 27
Generate a built-in waveform
The instrument can output a built-in waveform that is stored in the internal
memory.
1. Push the fr ont-panel Arb button.
2. Adjust the parameters of
arbitrary waveforms according
to How to generate sine
waveform (see page 24).
3. Press Built-in . The built-in
waveform menu is displayed.
4. Press Common , Maths ,
Window or Others to enter
built-in waveform detail list.
You can browse 45 kinds of
built-in waveforms saved in
the internal memory.
Use the
front panel general purpose
knob to scroll the files,
then
select a file and press Select .
Or press Cancel to cancel the
operation.
There are 45 kinds of Built-in waveforms, see as follows:
Name Explanation
Common
StairDown Stair-down waveform
StairUp Stair-up waveform
Stair Up&Dwn Stair-up and stair-down waveform
Trapezoid Trapezoid waveform
RoundHalf RoundHalf wave
AbsSine Absolute value of a Sine
AbsHalfSine Absolute value of half a Sine
ClippedSine Sine transverse cut
ChoppedSine Sine vertical cut
NegRamp Negative ramp
OscRise Gain oscillation curve
OscDecay Attenuation oscillation curve
CodedPulse Coded pulse
PosPulse Positive pulse
NegPulse Negative pulse