22
AFG1022 Quick Start User Manual
Instrument front panel, interface, and rear panel
Rear panel
The following illustration shows the rear panel connectors for the instrument.
1
2
3
4
5
6
7
8
Item
Description
1
Power input
: This is where you attached an appropriate power cord to supply
power to the instrument.
2
Fuse
: Use the specified fuse according to the voltage scale.
The rating of replaceable fuse:
Voltage
Fuse
100 - 120 V 250 V, F1AL
220 - 240 V 250 V, F0.5AL
3
Power line selector
:
Switch between 110 V / 220 V.
4
USB (type B) connector
: This can be used to connect a USB type B controller.
5
Ext Mod In Connector
: This is the BNC connector for external
modulation input. It can be used to input a modulating signal.
6
Ext Trig/Burst/Fsk In connector
: This is the BNC connector for external
trigger/burst/FSK input.
7
Ref Clk/Counter In connector
: This is the BNC connector for external reference
clock or counter input.
8
Ref Clk Out connector
: This is the BNC connector for external reference clock
output.