Acquire the Signal
2.
If you change your mind, push
Undo Default
Setup
to undo the last default setup.
Undo
Default
Setup
Using Autoset
Autoset adjusts the instrument (acquisition, horizontal, trigger, and vertical controls) such that it displays four or
fi
ve waveform
cycles for analog channels with the trigger near the midlevel, and ten cycles for digital channels.
Autoset works with both the analog and digital channels.
1.
Connect the analog probe, and then select
the input channel. (See page 79,
Analog Channels
Connect the digital probe and select the
input channel. (See page 110,
Digital Channels
Tektronix 4000 Series Oscilloscopes User Manual
87
Summary of Contents for 4000 Series
