www.tek-trol.com
6
1.2.6
Transportation
•
Avoid impact shocks to the device and prevent it from getting wet during
transportation.
•
Verify local safety regulations, directives, and company procedures with respect to
hoisting, rigging, and transportation of heavy equipment.
•
Transport the product to the installation site u
sing the original manufacturer’s
packing whenever possible. 1.4.3 Storage the Tek-Clamp 1200A-100H is designed
for installation and usage purpose in typical commercial/industrial environments.
The following considerations must be observed in selecting a location for the
meter:
•
The ambient operating temperature range is -22°F (-30°C) to 176°F (80°C).
•
Do not expose the meter to corrosive liquids or fumes.
•
Avoid installation locations that are close to strong sources of electrical
interference.
•
Avoid installing the electronics enclosure in direct sunlight.
•
Avoid installation locations where the transducers will be exposed to vibrations in
the piping system.
•
Always run transducer cables in a dedicated conduit separate from signal and power
cables.
•
Allow sufficient space for daily inspection, wiring, etc.
•
Avoid installing the meter at a place subjected to, or at risk of, flooding.
