LoRa IoT Smart Room Sensor User Guide
T0006338_UG
Version 1.5
TEKTELIC Communications Inc.
Page 9 of 30
Base Model PIR Model
Figure 1-1: The Smart Room Sensor models.
1.2
Physical Interfaces
Figure 1-2 illustrates the customer accessible interfaces for the Smart Room Sensor. All models
share the same layout, though only functional interfaces are exposed in the case of each model.
For example, a Base model has been shown in Figure 1-2, which does not have the PIR element
(the PIR transducer indicated in the figure is the location for the actual PIR transducer in the PIR
variant). Also, the PIR variant does not have the External Connector. Not shown in Figure 1-2,
the Base variant has two internal moisture probes for moisture (leak) detection. The PIR variant
does not have these probes and does not offer moisture detection.
