LoRa IoT Smart Room Sensor User Guide
T0006338_UG
Version 1.5
TEKTELIC Communications Inc.
Page 26 of 30
5
Battery Replacement
The Smart Room Sensor is powered by a standard CR2477 coin cell.
Warning
The Kona Smart Room Sensor contains a coin cell battery.
Do not ingest battery, Chemical Burn Hazard.
If a battery is swallowed, it can cause severe internal burns in just 2
hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the
product and keep it away from children.
If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
Use only approved CR2477 cells when replacing the battery. The following are approved
replacement cells:
•
Panasonic (model CR2477)
•
Sony (model CR2477)
•
EVE Energy (model CR2477)
•
Jauch (model CR2477)
In order to access the battery, remove the two screws securing the case. The screws are
accessible on the bottom of the sensor case and require a Phillips screwdriver PH1:
•
Remove the two screws on the bottom of the case.
•
While holding the sensor with the bottom facing up, remove the bottom of the case by
gently prying the case apart.
