TEK-NTS03-G+-Manual-v3.-012022
P a g e
| 23
www.tekron.com
© 2022 by Tekron International Limited. All Rights Reserved. All trademarks are the property of their respective holders. The
information in this document is provided for informational use only and is subject to change. For further information or support,
6.
INSTALLATION
Identification
Each NTS 03-G+ unit is shipped with identification labels on the side of the unit. The label
provides details of the particular options fitted to the unit during manufacture, as well as the
power supply requirements and the unit serial number.
Check the identification label on the side of the unit to ensure that the correct model
has been supplied before proceeding to install!
Location
The unit is intended for installation in restricted access areas. A restricted access area
can be accessed only using a lock and key or other means of security. Installation is to
be done by suitably qualified personnel.
Power Supply(s)
The input voltage range is marked on the product label on the side of the unit. Do not
apply voltage outside the range noted.
Hazardous Voltage
Up to 300 V may be present at the Power Input ports P1A and P1B. Up to 200 V may be present
at the Alarm Relay port P4 and P5. These voltages are supplied to the unit only, and not
generated by the unit. However, the installer must exercise care in wiring the associated plugs
to ensure bare copper is not accessible.
