![background image](http://html.mh-extra.com/html/tekron/nts-02-g/nts-02-g_user-manual_1077254019.webp)
19 |
P a g e
7.
Factory Hardware Options
Power Supply Options
This table shows the three different power supply options that can be ordered with NTS 02-G.
Designator
Input Range
High Voltage (3 pin)
85 - 250 Vac / 90 - 300 Vdc
Medium Voltage (3 pin)
20 - 75 Vdc
Low Voltage (3 pin)
14 - 36 Vdc
Slave Only Option (Fiber input)
The NTS 02-G can be ordered as a slave-only device in which case, the SMA antenna jack is removed,
and an ST Fiber receiver port (multi-mode) is fitted instead. The unit will synchronize to an incoming
IRIG-B signal on either P2 (RS422 format signal required) or on the Fiber input.