HOYA IrWave 520UK USB-IrDA Installation Guide
System requirements:
Before you begin installing the
HOYA IrWave 520UK USB-IrDA
device, be sure your computer meets
the following system requirements.
►
USB port (USB Specification Version
1
.
1
compliant).
►
CD-ROM or DVD-ROM drive (for use with the Windows CD).
►
One of the following operating systems:
Microsoft® Windows 98/98SE, Windows Millennium Edition (Me) or Windows 2000.
Device driver installation:
The setup program will auto-detect which operating system do you using. Follow the instructions for
your operating system : Windows 98/98SE, Windows Millennium Edition or Windows 2000.
●
Make sure that the HOYA IR520UK Usb-IrDA device is not plugged in before installing this device
driver.
1
. Double click on the
IR520UK
icon found on the CD.
2. Click
Next
when the Install Shield Wizard appears.
3. Confirm the Destination Directory and click
Next
to proceed.
4. Confirm the Target Folder and click
Next
.
5. The Add Infrared Device Wizard appears on the screen, simply click
Next
.
6. Highlight the
HOYA Computer Co.,
under manufacturer list and select the
HOYA IR520UK USB-
IrDA device
under infrared devices. Choose the appropriate file which corresponds to your operating
system.
7. The device drivers will now be successfully loaded and it is important to restart your computer.
●
You can now plug in your HOYA IrWave 520UK USB-IrDA device once your system is restarted.
The blinking LED on the unit indicates that the unit is working properly.
Un-Installation for Windows 98/98SE, Windows Millennium Edition or Windows 2000:
1
. Click on Add/Remove Programs from the Windows Control Panel.
2. Select
HOYA IR520UK USB-IrDA Device
and click Remove.
3. Go into Windows Device Manager and remove
HOYA IrWAVE 520UK USB-IrDA
and
Infrared
Communication Device
under the Infrared Devices category.
4. Select
HOYA IrWAVE 520UK USB IrDA – Windows xxxx
under the Network Adapters category and
click Remove.
○
You have now successfully uninstalled your HOYA IrWave 520UK USB-IrDA device.
Please un-plug the HOYA IR520UK USB-IrDA device and restart your computer to finalize the
settings.
