ASTRA-942
Laser Pointer
User Guide
Manufacturer:
ZAO NTC TEKO
420108, Russia, Kazan,
Gafuri str., 71
Tel.:+7(843) 528-03-69
[email protected]
www.teko.biz
Made in Russia
Rev. 942-v1_1_instr_en
1 FUNCTION
The Laser Pointer is designed for:
– remote launching of the registration proce-
dure on 433 MHz wireless system and on As-
tra-A addressable wired devices,
– remote testing of wireless devices of the fire
detectors of 433 MHz and Astra-A systems,
2 SPECIFICATION
Range, m, not more:
- for fire smoke and heat detectors .................10
- for other addressable devices ....................... 5
Output power
radiation, mW, no more ................................... 5
Supply voltage, V ........................ from 2,2 to 3,0
Current consumption in mode
transmission, mA, no more.............................10
Radiation wavelength, nm ......... from 630 to 680
Overall dimensions, mm ................. 77
× 40 × 15
Operating conditions
Temperature range,
°
С .............from -10 to + 55
Relative Humidity air, % .......... up to 95 at + 40
°
С
Without moisture condensation
3 DELIVERY SET
The Pointer delivery set includes battery
CR2430 (installed) - 2 pcs.
4 INDICATION
Status
LED
Norm
1x short flash for 0.1 sec.
when any button is pressed
Battery
discharge
Flashes continuously when
any button is pressed and
the power supply voltage is
below 2.7 V
5 OPERATION
ATTENTION! Laser radiation!
Avoid direct eye contact!
5.1
Focusing the laser beam
1)
Press and hold any button on the laser
pointer until the laser beam appears.
Cap
LED
Test button
Optimize button
Register button