Astra-10 Ver.2
Light Alerter
User Instruction
*
Sales:
Controlex GmbH
Philosophenweg 31-33
47051 Duisburg,Germany
+49 (0) 203/393 91 188
Warranty service and
technical support:
TEKO-TD
Prospekt Pobedy str. 19
420138 Kazan, Russia
+7(843) 261-55-75
Made in Russia
Rev. 10-2v1_0_instr_EN
1 FUNCTION
The alerter is intended for light alerting about
current status of an object equipped with a
control panel of a fire/intrusion detection and
alarming system
.
2 SPECIFICATIONS
Contrast perception of light signal
against ambient light background, Lx, min ... 500
Light signal viewing angle
,° ......................... 180
Power supply voltage, V ................ from 10 to 15
Current consumption, mA, max ......................60
Overall dimensions, mm, max:
- diameter ......................................................90
- height ...........................................................26
Weight, kg, max .......................................... 0,06
Operating Conditions
Temperature range,
°
С ............from - 30 to + 55
Relative air humidity, % .......... up to 93 at + 40
°
С
Without moisture condensation
3 DELIVERY SET
Delivery set contains holders and fasteners
(dowel
– 2 pcs., screw – 2 pcs).
4 INSTALLATION LOCATION
1)
Install alerter on bearing walls and carriers.
2)
Inside permanent structures the preferable
places of installation are those well viewed from
outside
.
3)
Installation place should
avoid
exposure
to sunlight
.
4)
Connection wires should be located far
from power cables.
5 INSTALLATION PROCEDURE
1)
Remove
the
cover
by
turning
it
counterclockwise with respect to the base
.
2)
Remove PCB.
3)
Fix alerter base on the wall.
4)
Replace PCB and perform wiring (see par.
6
).
5)
Replace alerter`s cover.
