STEP 2: For Worksurfaces 66" or wider follow the isntallation step for the Support on Step 1,
then install a Reinforcing Channel as shown above.
NOTE: Channel location (L) = 1.75"
STEP 1: Flip the Worksurface onto a clean surface. Flip the Flush End Support upside down
and align the holes on the support with the holes on the Worksurface. Secure the support with
Screws provide in the kit.
Section:
Description:
Page No:
Date:
INSTALL SUPPORT
INSTALL SUPPORT (FOR WORKSURFACE ≥ 60")
TST_251
4 of 4
May 2018
FLUSH END AND FLUSH END BRACKET
WORKSURFACES & COUNTERTOPS
transit
Installation Guides
A1
B1
B1
A1
D
F2
F1
