manualshive.com logo in svg

Teknion Leverage, Installation Manuals, Page: 172 / 516

Share
Download
Teknion Leverage Installation Manuals Download Page 172

Four-Way Bracket for 30" High Panel 90 Deg  (KPJ4)

Part and Product Identification

A 

- Four-Way 90 Deg Corner Bracket

      (A15-8567) x1

Section:
Description:

Page No: 

Date: 

Rev. No:  1

FOUR-WAY BRACKET FOR 30" HIGH PANEL 90 DEG INSTALLATION

PANEL CONNECTIONS AND TRIMS

May 2020

1 of 4

TLE_216

leverage 

Installation Guides

B 

- Corner Bracket Spacer Plate

      (A15-8538) x3

NOTE: Use KPJ4 with Glass Panel
Add-On: KPOGBS/KPOGBD. For
other Glass Panel Add-On, use standard
corner brackets.

Summary of Contents for Leverage





































































































































































































































































































































































































































































































































Reviews:

No comments