background image

 

Release Date: 12.02.2020 

Rev:0 

GENERAL

Read  this  manual  carefully  before  operating  the  devices  and  save  them  for  later  use.  Follow  all  warnings  and  precautions 
mentioned in the user manual. Follow all operating instructions, respectively. 
 

 

Since the sound level produced by this device may cause hearing loss, it should not be used indoors. 

 

The sound level produced by the device may be harmful to the human ear, use headphones during assembly. 

 

Keep the devices away from water and moisture. 

 

When cleaning the devices, always remove the electrical connection, do not use liquid cleaner (detergent, etc.), clean with 
a damp cloth. Always use the device with its own box 

 

Since the device is not mounted securely, it may be harmful to the device and / or environment, so be sure to install the 
device on a solid surface. 

 

ENVIRONMENTAL: 

Do not operate the device in extreme hot and cold environments except the following conditions. 
Temperature     : Between -10

C ~ +65

Humidity: %95rH at +40

 

VENTILATION: 

This device does not need ventilation. 
 

POWER: 

Use the device only with the voltage values specified in this manual. If you are  unsure about the supply voltage of the device, 
please contact your dealer or the manufacturer. 
 

EARTHING AND POLARIZATION: 

Before energizing the device, make sure that the grounding is properly connected. Note that the supply voltage is appropriate. 
 

POWER CABLE PROTECTION: 

Protect the power cord from being crushed and broken. 
 

POWER LINE: 

Especially for external applications, feed with a separate line from the power line of devices such as lighting lamps or power 
circuit and keep away from the line of other devices. 
 

OVERLOAD: 

To protect against the risk of electric shock or fire, do not connect extension cords and outlets to the device (s) that will draw 
more current than usual. 
 

OBJECT AND LIQUID INPUT: 

To prevent fire and electric shock, make sure that no liquid or any object can enter the device, which may cause a short circuit. 
 

SERVCE: 

In  case  of  any  malfunction,  contact  your  dealer  or  authorized  service.  Technical  intervention  to  the  device  must  be  done  by 
qualified service personnel. 

Do not try to repair the device yourself, if you open the cover of the device, you may be exposed to electric shock. 
 

MALFUNCTIONS REQUIRING SERVICE: 

In case of any malfunction or in the following cases, contact your authorized service or dealer. 
 

 

When the power cord or plug is damaged 

 

Any contact of water, rain or chemical liquid inside the device 

 

When an object falls on the device or is hit 

 

If the device has been dropped or the casing has been damaged 

 

If the device has a noticeable level of performance change 

 

Call the service if the device does not operate normally according to the operating instructions specified in the user manual 
or because incorrect operations may cause other malfunctions., 

 

 
 

VAS-741B Blue Window (Metal Internal Protection) 

VAS-741BP Blue Window (Polycarbonate Internal Protection) 

VAS-741BX Blue Window (Without Internal Protection) 

VAS-741R RED Window (Metal Internal Protection) 

VAS-741RP RED Window (Polycarbonate Internal Protection) 

VAS-741RX RED Window (Without Internal Protection) 

INSTALLATION & USER MANUAL

 

Summary of Contents for VAS-741B

Page 1: ... applications feed with a separate line from the power line of devices such as lighting lamps or power circuit and keep away from the line of other devices OVERLOAD To protect against the risk of electric shock or fire do not connect extension cords and outlets to the device s that will draw more current than usual OBJECT AND LIQUID INPUT To prevent fire and electric shock make sure that no liquid...

Page 2: ...ing and charging hold voltage System that can distinguish faulty battery Separate LED indicator on the card Automatic discrimination of energy cut and sabotage Adjustable automatic silence time 3min 10min Ability to work with external or internal energy Automatic trigger detection trigger or trigger 6 ultra bright LED flashers Internal rechargeable Ni MH battery 6V 350mAh Ni Mh First assembly syst...

Page 3: ...ling make sure that the siren is at least 5 cm from all sides of the wall 3 Cable Connections EXAMPLE 4 line sabotage siren connection Suggestions If more than one siren is to be connected one of the sirens is EXT and the other is INT to prevent the sirens from drawing too much current from the panel Sirens in the INT position are powered by their own batteries at the time of the alarm 4 Battery U...

Page 4: ...ivated 5 minutes can be selected LD1 BATTERY FAULT LED RED If the battery is disconnected or faulty it light steadily LD2 CHARGING LED GREEN It is litght steadily if the battery is in charged and or fully charged Status Battery Fault LED RED BATTERY FULL LED GREEN CHARGING Result Normal Charge OFF OFF 64mA Charging Trickle CHARGE OFF ON 40mA Battery is Full discharging is blocked Charge Cutout ON ...

Reviews: