TWM-3885 CONVENTIONAL WIRELESS COORDINATOR
–
R01
TWM-3885 CONVENTIONAL WIRELESS COORDINATOR
–
R01
18
is observed. Device battery is taken out and installed back again after a while for resetting the
PER value or it can be reset by using the “Reset PER” option from the device menu
. If the PER
value still continues to increase the RF intensity in the environment must be checked. In such
case, the PAN might have been setup on a wrong channel or other PANs may be taking too
much space on this channel.
5.
HW indicates the hardware version.
6.
SW indicates the software version.
7.
Ping time, indicates the frequency that the devices will communicate with the connected
coordinator/router. A shorter ping time means that the coordinator will communicate with
the device faster and that reduces battery life. In order to adjust ping time, press FORWARD
on the menu selected to proceed to the ping time adjustment page. More detailed information
about ping time can be found under “Ping Time” topic.
8.
Reset PER is used for resetting the PER value of the device selected. Menu usage is explained
under the “Reset PER” topic under the functions. When this menu is accessed from the device
selected, the PER value of only the selected device will be reset.
9.
“Delete” is selected for deleting this device from the wireless network and the operation is
approved by pressing the FORWARD
button. The inscription “Successful” will be displayed on
the screen if the operation is successful while “Unsuccessful” will be
displayed otherwise. The
place of the deleted device will be shown blank on the list. The deleted device cannot send
data to the coordinator anymore. It needs to be connected back again.
3.8.5
Information
Module software and hardware versions, PAN details are viewed under this screen.
Information
To enter the menu: “Main screen” >
FORWARD > DOWN
> “Information” >
FORWARD
Information
>1.16 Device
2.4 Router
3.HW: 1.0.0
4.SW: 1.0.0
5.PAN Set
Information
4.SW: 1.0.0
5.PAN Set
6.Channel: 4
7.PAN ID: 10
>8.TX Power: 14dBm
Information Detail Screen:
1.
Number of battery-operated devices in the wireless system.
2.
Total number of coordinator and routers.
3.
Hardware version of the module card.
4.
Software version of the module card.
5.
If PAN is set, the inscription is “PAN Set”; if PAN is not set the inscription is “No PAN”.
