7
T
EKNİM PARS SERIES
ALARM CONTROL PANELS
QUICK INSTALLATION GUIDE
User Codes
There are no user codes defined in the control panel as a factory default. To define a user code, it is
necessary to enter the Master Menu with Master Code.
To enter “Master Menu” with “Master
Code
”
;
Press and Hold the Key
[4]
Enter four-digit Master Code
(Factory Default
: “1234”)
To set user code;
LED Keypad;
[07] [01]
→
[1. User Code
XXXX
]
→
[√
Ok]
LCD Keypad;
[Basic Settings
√
Ok]
→
[User Codes
√
Ok]
→
[01-User Code
XXXX
]
→
[√
Ok]
e.:
To set
1. User Code as 1111;
[07] [1] [1111] [√
Ok]
To set 2. User Code as 2222;
[07] [2] [2222] [√
Ok]
Important:
GSM/GPRS, CMS Communication and SMS configuration can be done
only by Teknim PC Configuration software. You can download the software from
www.teknim.com
