ATP545 Digital Passive Infrared Detector
ATP545P Pet-Immune Digital Passive Infrared Detector
ATP545LR Long Range Digital Passive Infrared Detector
Installation and User Manuel
Issue Date: 05/02/2016
TECHNICAL SPECIFICATIONS
Infrared sensor
Dual element, Digital
Alarm period
3 sec.
Power requirement
9 ~ 16 VDC, 20mA
Alarm output
N.C 30VDC, 0.2A max.
Sensitivity setting
With trimpot
Pulse count
3 modes, 1, 2, 3
Tamper
N.C (cover open and wall
removal activated)
Activation LED
Red, can be disable
Detectable speed
0.3 ~ 1.5m/sec.
Pet Immunity
20 kg, 60cm (ATP545P)
Mounting height
For all model 2.1 ~ 2.5m
Humidity
95% RH (max)
Temperature
-20
C ~ 45
C (-4
F ~ 113
F)
Dimensions
108 X 63 X 50 mm
Weight
80 gr
Temperature
compensation
Yes
Technical specifications may be changed without
notification.
COMPONENTS
Warning:
Do not touch to the Infrared sensor
MOUNTING
WARNING!
For ATP545P, it must be mounted to 2.1-2.5m height
wall without mounting foot for correctly running pet
immunity feature.
CABLE CONNECTIONS
Insert the PCB to it’s place and connect the signal cables
related points.
POWER
: 9 ~ 16 VDC power supply
ALARM
: Control panel zone input (N.C)
TAMPER
: Tamper switch contacts (NC)
SENSITIVITY SETTING
ATP545 series PIR detectors have the sensitivity setting with
trimpot For adjusting, use a thin screwdriver.
Sensing dis. for ATP545 Digital Passive Infrared Detector
Sensing distance when SENS Pot is lowest pos.
: 8m
Sensing distance when SENS Pot is center pos.
: 12m
Sensing distance when SENS Pot is highest pos.
: 14m
PULSE SETTING
ATP545 series PIR detectors have pulse setting with 3 levels
(1, 2, 3)
ACTIVATION LED SETTING
Set to “OFF” mode, if you do not want that LED is off when
the detector detects any moving.
Connections
Pulse jumper
LED on/off jumper
Tamper switch
Infrared sensor
Activation LED
Sensitivity setting
